logo

FLATSCAN30™ Portable X-Ray – E.O.D. Mobile Scanner is now a mature technology

FLATSCAN30 XS™ / FLATSCAN15 XS™

E.O.D. Mobile Scanner is now a mature technology …

The second generation of the E.O.D. scanner has its performances boosted by the latest state of the art technologies.

Faster:

  • 3″ booting time
  • 5″ image capture
  • 1 click post-process

More secure:

  • 1 approach system
  • practically dead-free zone
  • No RF emission (option)

More enhanced features…

  • 30’’ & 15″ image areas
  • 3 edges
  • Extra-long life battery
Faster:

  • 3″ BOOTING TIME
  • 5″ IMAGE CAPTURE
  • 1 CLICK POST PROCESS
More secure:

  • 1 APPROACH SYSTEM
  • PRACTICALLY DEAD ZONE FREE
  • NO RF EMISSION (OPTION)
More enhanced features…

  • 30’’ & 15″ IMAGE AREAS
  • 3 EDGES
  • EXTRA-LONG LIFE BATTERY

Second Generation

FLATSCAN30 XS is the second generation of ICM’s highly innovative flat and portable photodiodes scanner system. As a result of improving the majority of its characteristics, the FLATSCAN30 is capable of identifying any threat both faster and in a more secure manner than ever. With 50% more photodiodes and an ultrafast FPGA micro-controller technology, the new FLATSCAN30™ has a better image, is easier to use and is more reliable in harsh RF environment.

Several hundred shots with a single battery charge

By using the very latest “free of memory effect” nanophosphate battery technology, the FLATSCAN30 can be used for hours and captures 500 images before it requires a new charge. Furthermore, to avoid unexpected disruption, the state of the battery is displayed in remaining hours onto the PC software.

Larger active area, smaller overall sizes

Within even smaller sizes than first generation, its active zone has been increased to 30’’ diagonal enabling inspections in just one scan and avoiding the operator to expose himself to threat a second time. Furthermore, the FLATSCAN30 is now an exclusive “3-Edge” system allowing objects to be fully scanned up to the extremity of the three (3) FLATSCAN30 edges.

Extended lifetime

The FLATSCAN30  XS has 768 units of 800 µm photodiodes (1,536 units of 400 µm optional), which are mounted on 12 chips. In case of dead pixel, every chip can be individually, simply and inexpensively replaced instead of being obliged to scratch the whole equipment as it is the case with 2D flat panels.

Material discrimination

As a hardware and software option, the FLATSCAN30 XS differentiates organic and non-organic material in as fast as 5 seconds capture.

Innovative software features

The user-friendly multilingual interface allows the operator to take and process his first pictures after just a few minutes training. The thumbnails bar is particularly helpful to visualize the different images taken during the operation. Moreover, the database-oriented storage system makes it possible to annotate, store, classify and retrieve images in a very intuitive way.

Specifications
Sensor type Linear diode array
Resolution 40 AWG / 1.8 lp/mm
Pixel size 800 µm (400 optional)
Dynamic range (Grey levels) 14 bit (16,384)
Active area 614 (W) x 460 (H) mm/ 24 (W) x 18 (H) in / 30 in diagonal
Maximum penetration1 25 mm of steel (guaranteed with CP120B) / 29 mm of steel (typical with CP120B)
30 mm of steel (guaranteed with CP160B) / 34 mm of steel (typical with CP160B)
Number of “covered sides” 3 (Left, right and bottom)
Uncovered active area 5 mm (from bottom) / 7 mm (from sides)
Booting time 3 sec
Image acquisition time: min/max 5 / 276 sec
Battery life 4 h (standby mode, no RF) > 500 images (5s, no RF)
External dimensions 628 x 642 x 42 mm3/ 24.7 x 25.2 x 1.65 in3
Weight 9.5 kg / 20.9 lbs
Operating temperature -10 to +40 °C / +14 to +104 °F
Storage temperature -40 to +70 °C / -40 to +158 °F
Communication protocols Bluetooth / Wi-Fi 802.11n (cable optional for zero RF radiation )

 

  • Share